Dingo® TX 427 Narrow Track

Dingo® TX 427 Narrow Track Toro

Toro Dingo® compact utility loaders possess the versatility to handle countless jobs on every site: dig, haul, plant and build. The TX 427 Narrow track design provides a low 5.1 psi ground pressure which is easy on turf. Designed with workers in mind, all of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately!

Simple Controls

You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

Exclusive TX Track Drive

Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.

4-Pump Hydraulic System

4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Compact Size

Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

Air-Cooled Gasoline Engine

A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX.

Reinforced Tracks

Durable Kevlar reinforced tracks offer extended life, unlike competitive units with metal inserts. Open design of tracks offers self cleaning, preventing the collection of sand, rock, mud, and debris that could jam tracks.

Cooling System
Air Cooled
Engine
25 HP (18.6 kW) Kohler Command Pro Series CH 740
Flow
11.4 gpm (43.2 lpm)
Ground Clearance
4.6″ (11.7 cm)
Ground Speed
0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h)
Height
46.1″ (117.1 cm)
Hinge Pin Height
65.8″ (167.1 cm)
Hydraulic System Pressure
3,000 PSI
Length
92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket
Loader Hydraulic System
Joystick control for all funct
Operating Capacity
535 lbs. (243 kg)
Reservoir Capacity
10.5 gallons (40 liters)
Tip Capacity
1,530 lbs. (694 kg)
Track
96.6″ x 5.9″ (245 cm x 15 cm)
Weight
1,882 lbs (854 kg)
Width
33.7″ (85.6 cm)
Disclaimer
*See your local dealer for warranty details.

Compact Utility Loader Attachments

From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.
See them all here:

Aggressive Tread Tracks

Make those difficult job site conditions easier to maneuver with this aggressive track option.

Ride-On Platform

Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue – especially in applications requiring a lot of hauling and covering substantial distances.