TRX-16 Walk-Behind Trencher (22972) Toro
Tracks instead of wheels. Simplicity instead of complexity. The TRX trenchers are the first tracked, dedicated walk-behind trenchers that have it all. Tracks – combined with Toro’s exclusive easy-to-use control system – provide unparalleled maneuverability, all while offering the ultimate in operational performance.
Track Design
• Allows for zero turn capability
• Provides a low center of gravity and large footprint
• Increased stability on side hills
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions.
Exclusive Toro TRX Control System
Easy-to-use control system doesn’t require jerk-style steering like handle bar trenchers. Three simple controls operate all traction and trenching functions. Simple controls are easy for beginners to learn quickly. Similar to Dingo TX and STX stump grinder.
Kawasaki Twin-Cylinder Engine
Powerful Kawasaki engines deliver the performance you have come to expect from Toro. The Kawasaki twin-cylinder engine means your trencher will be reliable and easy-to-start. The large oil reservoir maintains a cooler running engine while prolonging engine life.
Heavy-Duty Remote Air Cleaner
Reduces engine wear and improves performance. Heavy-duty remote air filter standard on TRX-26.
TRX Pivoting Trencher Head
Pivoting head provides high ground clearance during transport.
Engine
14.5 HP (10 kW) Kawasaki® FS481V, V-Twin
Engine Oil Capacity
1.8 quarts (1.7 liters)
Flow
10 gpm (38 LPM) auxiliary. 9.5 gpm (36 LPM) each traction circuit
Fuel Capacity
2.1 gallons (7.9 liters)
Headshaft Speed
226 RPM w/385 ft/lbs (522 N) of torque
Hour Meter
Standard
Hydraulic Oil Capacity
6.3 gallons (23.8 L)
Hydraulic System Pressure
2900 psi (200 BAR)
Pivoting Trencher Head
Provides high ground clearance during transport
Track
5.9″ (15 cm) wide – endless nylon reinforced rubber track
Transport Speed
3.1 mph (5 km/h) fwd, 1.2 mph (2.4 km/h) rev. 273 ft/min (83 m/min)/ 132/ft/min (40 m/min)
Wheelbase
23″ (58 cm)
Chains
4″ (10.2 cm), 6″ (15.2 cm) and 8″ (20.3 cm)* chain widths available:
Soil & Cup Chains
Rock & Cup Combo Chains
Shark (Rock) Chains (4″ and 6″ only)
Bullet (Alligator) Chains (4″ and 6″ only)
*Only available for TRX-26
Bore Drive Head
Easily bore under driveways and sidewalks to simplify irrigation and cable installations. Design allows for boring unit to be lowered into the trench to aide in level operation.
Backfill Blade
Installed in less than a minute without tools to allow TRX to complete trenching job. Cut job time and labor by using the TRX to backfill the open trench efficiently.
Custom Trailer
Easy to load on any trailer, including Toro’s custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires.
Trencher Boom
24″, 36″ or 48″ reversible booms available
Trencher Crumber
The Toro crumber is designed specifically to make the trench bottom clean and smooth. The crumber follows behind the chain to clean all “crumbs” from the bottom of the trench. The hardend tip of the crumber pulls any loose material back into the chain teeth.
404800000-999999999
404710000-404799999
402461470-404709999
400000000-402461469
316000001-316999999
315000001-315999999
314000301-314999999
314000001-314000300
313000001-313999999
312000001-312999999
311000001-311999999
Details
- 14.5 hp (10.8 kW) Kawasaki® Twin-Cylinder Engine
- Toro exclusive traction control system, similar to Dingo TX and STX stump grinder
- Tracks instead of wheels
- Easy to maneuver
- Equipment Type
- Walk Behind Trenchers
