Burns 'Tough Tested" Used Equipment Offers 3 Levels of Reconditioning

GDP210-3

Burns is the leader in Used Equipment Reconditioning

Buying used material handling equipment is a great solution when you need equipment quickly and don’t have the budget allocated for a new piece of equipment. Used equipment can be affordable, but are you sacrificing the reliability of new equipment? If you want the best of both worlds, consider Burns “Tough Tested” used equipment. Reconditioned used equipment has the added benefits of being refurbished to ensure it functions as reliably as a new truck, at a fraction of the cost. Burns offers three levels of reconditioning, to suit your budget and operational needs.

Good Level

The ‘Good’ package includes prepping and inspecting the truck prior to delivery, but keeping it ‘as-is’. This is typically for an older, high-hour unit.

Better Level

The ‘Better’ package is designed for the customer who needs a dependable unit without frills. These units are often lease returns, rental units or trade-ins. Each truck will be checked out with our 200-Point Inspection to assure proper engine and transmission performance. Each unit will be steam cleaned and given a full PM service prior to delivery. The unit will not be painted. Warranty: the truck will come with a 30-day major component warranty. A 6-month or 500-hour warranty is available with a signed 12-month OM contract at the time of delivery.

Best Level

The ‘Best’ package gives you the highest level of reconditioning. Our technicians do a thorough, 200-point evaluation of the machine. They evaluate all aspects to determine if the truck is suitable for this level of reconditioning. The refurbished truck has critical new components and repairs, along with a complete steam cleaning, sanding and painting. Warranty: the truck will come with an exclusive 120-day warranty. A 6-month or 500-hour warranty is available with a signed 12-month OM contract at the time of delivery.

The Burns 200-Point Inspection includes the following:

OPERATIONAL CHECK

  • Brakes – forward/reverse
  • Hoist capacity – load
  • Hoist – lower speed
  • Steering operation
  • Tilt capacity – load
  • Turning radius
  • Travel speed

GENERAL TRUCK VISUAL INSPECTION

  • Fork/fork pins
  • Counterweight/bolt
  • LPG/tank/brackets
  • Cowl & cowl covers
  • Hood/hood sides/latches
  • Load backrest
  • Floor plate
  • Tires
  • Drive
  • Steer
  • Operator’s seat
  • O.H.G.

STEERING SYSTEM

  • Hand wheel arm
  • Stops
  • Horn button kit
  • Drag link
  • Grease & fittings
  • Steering column
  • Sector/orbitrol
  • Pitman
  • P/S cylinder

STEER AXLE

  • Articulating shaft
  • Steer knuckles
  • Wheels
  • King pins/bearings
  • Bellcrank
  • Wheel bearing & seals

ENGINE

  • Engine condition
  • Runs
  • Smokes
  • Leaks
  • Noise
  • Skips
  • Comp. reading
  • Valves
  • Oil pump
  • Main bearings
  • Engine gaskets
  • Timing chain & gear
  • Rings & pistons
  • Rod bearings
  • Crank shaft & pulley
  • Flywheel
  • Starter ring gear
  • Oil & Oil Filter

FUEL SYSTEM

  • Air cleaner
  • Air element
  • Air hose & clamps
  • Governor

COOLING SYSTEM

  • Radiator
  • Fan & belts
  • Antifreeze
  • Thermostat
  • Water pump

GASOLINE SYSTEM

  • Carburetor
  • Fuel Pump
  • Fuel lines
  • Fuel filters
  • Fuel tank & straps
  • Fuel tank cap

L.P. GAS SYSTEM

  • Carburetor
  • Regulator/vaporizer
  • Bulkhead filter
  • Lockoff valve
  • L.P. hoses
  • Primer button
  • Tank & brackets
  • Vacuum switch

IGNITION SYSTEM

  • Coil resistor
  • Pick-up sensor & kit
  • Spark plugs & wires
  • Distributor
  • Coil/pulse transmission
  • Distributor cap
  • Ignition power pack

BRAKE SYSTEM

  • Master cylinder
  • Wheel cylinder
  • Pedal & linkage
  • Shoes
  • Backing plate
  • Backing plate mounting
  • Wheel seals
  • Adjusters
  • Drums
  • Wear rings
  • Lines

PARKING & SEAT BRAKE CABLE

  • Brake cables & linkage
  • Return to neutral/cable
  • Seat linkage
  • Hand lever

ELECTRICAL SYSTEM

  • Battery & battery cable
  • Battery mounting
  • Voltage regulator
  • Horn & horn relay
  • Ignition switch
  • Anti-restart
  • Wiring harness
  • Fuse block
  • Alternator/generator

INSTRUMENTS

  • Ammeter/warning light
  • Fuel sending unit
  • Fuel gauge
  • Oil pressure gauge sender
  • Oil pressure gauge
  • Warning light
  • Water temp. gauge sender
  • Water temp. gauge
  • Hour meter
  • Instrument voltage regulator
  • Neutral starting switch

ELECTRICAL ACCESSORIES

  • Headlights
  • Taillights
  • Rotating or flashing warning lights
  • Back-up alarm
  • Accessory switches

TRANSMISSION

  • Check sump
  • Filter
  • Torque convertor leaks
  • Starter ring gear
  • Leaks
  • Noise
  • Slippage
  • Correct fluid level
  • Full RPM
  • Idle
  • Pump reverse
  • Forward & reverse
  • Converter
  • Lubrication

GEARBOX

  • Oil level
  • Shifting linkage
  • Gears/bearings

DRIVE AXLE

  • Wheel hub/drums
  • Wheel bearings & retainers
  • Drive wheel mounting
  • Housing & seals
  • Axle shafts
  • Wear sleeves
  • Trunnion bushings
  • Rim condition
  • Fluid level
  • Axle flanges & bolts

DIFFERENTIAL

  • Carrier
  • Spider gears
  • Ring gear & pinion
  • Bearings
  • Oil level

HYDRAULIC SYSTEM

  • Pump drive/flow divider
  • Oil level
  • Main pump & coupling
  • P/S pump
  • Hydraulic control valve
  • Tubing & hoses
  • Tilt cylinder
  • Rod & rod ends
  • Piston, rod & cylinder head
  • Cylinder end head
  • Cylinder gland nut
  • Mast
  • Packing
  • Rams
  • Tubes and filters

MAST MECHANICAL

  • Trunnion bushings
  • Thrust rollers
  • Mast cap
  • Carriage
  • Adjusting screws & nuts
  • Load rollers
  • Roll pins
  • Wear plugs
  • Channels
  • Cylinder crosshead/rollers
  • Bearing strips
  • Chains
  • Hooks/hold down
  • Chain rods/anchors
  • Cylinder guides
  • Tilt bushings/pins
  • Grease fittings

Have Questions on New Equipment?

Let us help you! Contact us today.