Dingo® TX 525 Narrow Track

Dingo® TX 525 Narrow Track Toro

Diesel. Done Right.
Our diesel Dingo® TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 13.8 gpm and pumping 24 hp to the attachments, yet has a ground pressure as low as 5.2 psi. And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.

4-Pump Hydraulic System

4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Compact Size

Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

Exclusive TX Track Drive

Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.

Hydraulic Power

Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30″ (76 cm) holes or trench 36″ (91 cm) deep.

Liquid-Cooled Diesel Engine

The 23.3 hp (17.3 kw) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.

Simple Controls

You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

Cooling System
Liquid Cooled
Engine
23.3 HP (17.3kW) Kubota D902
Flow
Traction: 16.9 gpm (each pump); Auxiliary: 13.8 gpm
Ground Clearance
4.6″ (11.7 cm)
Ground Pressure
5.0 PSI
Ground Speed
0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h)
Height
46.1″ (117.1 cm)
Hinge Pin Height
65.8″ (167.1 cm)
Hydraulic System Pressure
3,000 PSI
Length
92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket
Loader Arm Flow
6 gpm (22.7 lpm)
Loader Hydraulic System
Joystick control for all funct
Operating Capacity
553 lbs. (251 kg)
Reservoir Capacity
10.5 gallons (40 liters)
Tip Capacity
1,580 lbs. (717 kg)
Track
96.6″ x 5.9″ (245 cm x 15 cm)
Traction Flow
16.9 gpm (64 lpm)
Weight
1,904 lbs (864 kg)
Width
33.7″ (85.6 cm)
Disclaimer
*See your local dealer for warranty details.

Compact Utility Loader Attachments

From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.

Ride-On Platform

Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue – especially in applications requiring a lot of hauling and covering substantial distances.