Dingo® 320-D

Dingo® 320-D Toro

The labor-saving Dingo® 320-D gives you greater capability and effortless maneuverability so you can get more done with less time in a short learning curve-even for inexperienced operators.

These machines are built to deliver a high power-to- weight ratio in the compact utility loader category. The Dingo 320-D also has zero-turn maneuverability to handle countless jobs on every site… dig, haul, plant and build.

2 Ground Speeds

Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve.

4-Paw® Independent 4-Wheel Drive

Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw eliminates the use of chains – reducing maintenance and eliminating the chance of a broken chain.

Compact Size & Maneuverability

Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you’ll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor.

Fingertip Controls

Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips.

Durable Hood

Durable, flexible resin hood protects your engine from damage and keeps dirt and debris out of the engine compartment. Your machine will run longer with less downtime.

Hydraulic Power

Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30″ (76 cm) holes or trench 36″ (91 cm) deep.

2-Pump Hydraulic System

Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm (37.9 lpm) and a low flow of 4 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power!

Quick Attach System™

Each attachment is equipped with Toro’s unique Quick Attach System™. The Dingo QAS makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception – the backhoe takes 2 minutes.)

Air Filter
Two-stage, heavy-duty, remote
Controls
Key, throttle, choke
Cooling System
Liquid Cooled
Engine
20 HP (14.9 kw) Kubota® D722
Ground Clearance
5.8″ (15 cm) front & rear
Ground Speed
0-3.0 mph (0-4.8 km/h) / 0-3.0 mph (0-4.8 km/h)
Height
48.7″ (123.7 cm)
High Flow Pump
10.8 gpm (40.9 lpm)
Hinge Pin Height
66″ (167.6 cm)
Hydraulic System Pressure
3,250 PSI
Length
82.2″ (208.8 cm) w/bucket; 62″ (157.5 cm) w/o bucket
Loader Hydraulic System
2 control levers- push/pull
Low Flow Pump
4 gpm (15.1 lpm)
Operating Capacity
475 lbs. (215.9 kg)
Reservoir Capacity
14.8 gallons (56 liter)
Steering Controls
Zero turn type w/ 2 controls
Tip Capacity
475kg
Weight
1,722 lbs (781 kg)
Width
40.5″ (103 cm) standard tires; 35″ (90 cm) narrow tires
Disclaimer
*See your local dealer for warranty details.

Compact Utility Loader Attachments

From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.

Brochure

Select your serial number range from the options below to view parts & manuals.

990001-999999